Bulk Carrier Deck Competence

Chief Officer Competence

Test for Chief Officers on bulk carriers. Covers stability (GM, MCT, FWA), ballast operations (BWM Convention), hold preparation and cleaning (Grain clean, Coal clean, Ore), chemical use, hatch cover maintenance, cargo and bunkering procedures.

प्रश्न 15

समय सीमा 9 min

भाषा अंग्रेज़ी

नमूना प्रश्न

यहाँ इस क्विज़ के कुछ उदाहरण प्रश्न हैं। पूरा टेस्ट देने के लिए GYRO ऐप डाउनलोड करें।

प्रश्न 1

The irregular cases, to which the Compatibility Chart cannot be directly applied, are covered by Appendix I, which details the:

A Exceptions.

B Inclusions.

C Enhancements.

D Encryptions.

प्रश्न 2

Damage control procedures after collision may include:

A All of the choices.

B Lashing the collided vessel’s together.

C Closing all watertight hatches and doors.

D Rigging fire hoses.

प्रश्न 3

Which of the following procedures should be followed immediately after replacing a hatch seal?

A The lid should be closed as tightly as possible and left closed until arrival in the next port.

B The seal compression should be measured and recorded.

C The groove in the seal should be measured in the forward corners of the hatch.

D The appearance of the new seal should be compared to that of the old seal.

प्रश्न 4

The aft draft marks of a vessel with a raked keel are measured from:

A The plan baseline.

B Under the keel at the forward tangent point.

C Under the keel amidships.

D The keel at the LCB.

प्रश्न 5

Guidelines for Ballast Water Management are given by which one of the following?

A The IMO Convention on Ballast Water Management.

B Classification society rules.

C MARPOL.

D SOLAS.

यह क्विज़ दें. इस क्विज़ को देने और अपनी प्रगति ट्रैक करने के लिए GYRO ऐप डाउनलोड करें।